Wigs are being updated continuously…

Default option color:

Upgrade eye color:

Note: Only silicone body can do “Standing without bolts”. Markings: ‘Tpe Body’ and ‘Ultra-soft Silicone Body’ only available with ‘Standing with Bolts’.

-Version 1.0 (Standard) – free

-Version 1.0 (Soft) Relatively soft, thus achieving a lifelike touch. – free

-Version 2.0 (Soft) Features a relatively soft, movable jaw, integrated tongue and teeth, and oral passages. -199$

All heads areavailable upgrade to Version 2.0, except Anny,Versi keiko, sunny, seren, Chole, Aisha.

(Enhanced Oral Fantastic Function: In“Version 2.0 Head”, the softer platinum silicon is used, which significantly improves the touch feel. Add movable jaw, oral passages, one-piece tongue and teeth, further deepening the rich expression and use function. )

Finger skeleton: The doll’s hands can make more delicate movements, which is convenient for photography.

Silicone body
4 points of articulation: chest, thigh

TPE body
5 points of articulation: chest, thigh, vagina

• Press the power button to display the factory settings for the preset temperature of the heating wire at 35°C and the heating time of 30 minutes.

• During the charging process, you can set the required charging time and temperature yourself (the maximum charging time is 90 minutes, and the maximum internal temperature is 70°C).

• Correct charging operation (only lying flat for heating, no other postures).

•  The doll skeleton is wrapped with heating wires to achieve uniform and efficient heating. The AC power is converted into DC power for heating through the power supply and heating stabilizer. When the doll temperature is heated to about 30°C, the charger will display the internal temperature as about 70°C (internal heating, uniform heat transfer); the surface temperature of the doll can reach up to about 40°C.
• The heating charging port is on the back or back of the doll’s neck.
• After charging for about 20-30 minutes, the doll’s skin temperature will rise slightly. After continuing to heat for about 1 hour, the surface temperature of the doll can reach about 30°C. When the surface temperature of the doll reaches about 40°C, the charger will stop heating.
• Note on cleaning the voice doll and the heating doll: Do not wash the heating hole behind the neck and the operation panel of the back sound generator when cleaning to prevent water from entering the circuit board, which may cause a short circuit in the heating circuit or the sound circuit.

Remarque :

1. The ambient temperature will affect the heating time.

2. The temperature will not rise too high when the product is in a safe lifespan.

3. Be sure to turn off the power during use! ! ! The doll must be heated lying flat and the process must be monitored throughout the process! ! ! If you use an electric blanket, you can only cover the surface of the doll, not wrap the doll, and the electric blanket needs to be set to the lowest temperature.

Features: As shown in the picture, all dolls can be customized with the following makeup. For special requirements, please inform Kanadoll customer service: [email protected]
Once the customized makeup is selected, it cannot be changed.

Belle 2.0Head Makeup #3 Show:

Jasmine 2.0Head Makeup #2 Show:

Jenny 2.0Head Makeup #2 Show:

Roy 2.0Head Makeup #3 Show:

Sleeping Cheryl 2.0Head Makeup#2 Show:

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Remarque :
1. Please allow a slight 1-3cm diference due to manual measurement and a litle color variation for diferent display settings.
2. Silicone body anus is not available.
3. Considering actual operation and storage, the silicone body is set as a weight reduce version by default.
4 Silicone material mets at hiph temperatures and is molded after cooine, The actualweieht ofthe produced dol and the marin of error are aporoximately 1 to 2kg.

Accessories: M16 Screw
The choice of head sculpt also varies depending on the body type. The following recommended collocations are meticulously crafted to achieve the optimal overall effect through careful consideration.